Computer, Diagnostic, Pre-Programmed, Single-Function

Reports per year

Source: FDA adverse event reports by year received, 2012–2026. Reporting paused during the 2026 MAUDE-to-AEMS transition and has since resumed.

Recent recalls

• 2013-04-18TerminatedComponent design/selection

  HCS3011 AV Loop Kit For use with Transonic CO status System Only, -HCS3021 AV Loop Kit For use with Transonic CO status System Only. Product Usage: is indicated for use in patients greater than or equal to 2 years old with arterial and venous lines in the diagnostic assessment of cardiovascular status including cardiac output and associated hemodynamic parameters.

  Transonic Systems Inc. have received complaints of blood leakage involving the AV Loop Kit.

• 2012-02-02TerminatedDevice Design

  Vigilance II Monitor Model: VIG2/VIG2E Software: versions 00.51, 00.60, 00.61, 00.62, 00.63, 00.64, 00.67, 00.69, 00.71, 00.73. Product Usage: The Vigilance II CCO/SvO2/CEDV Monitor is indicated for use in patients requiring monitoring of hemodynamic parameters, including cardiac output, oximetry and right ventricular, ejection, fraction, and end diastolic volume.

  Edwards Lifesciences has made the decision to initiate a field corrective action for the Edwards Vigilance II Model: Software: versions 00.51, 00.60, 00.61, 00.62, 00.63, 00.64, 00.67, 00.69, 00.71, 00.73 due to the potential of inaccurate Injectate Cardiac Output (ICO) measurements.

• 2010-10-28TerminatedProcess design

  Edwards' MHANM8 Pressure Slave Cable, Part Number:693657001 The Edwards Lifesciences Analog Slave Cable is used to transfer monitoring output from patient monitors to the analog input ports of the Vigileo Monitor series or compatible Edwards monitoring systems. This cable has instrument specific connectors.

  The recall was initiated because the Edwards' MHANM8 Pressure Slave Cable was wired incorrectly, thus will not work as stated.

• 2007-11-24TerminatedSoftware design

  Edwards Vigilance II Continuous Cardiac Output/Oximetry/Volumetric (CCO/SvO2/CEDV) Monitor Model: VIG2/VIG2E Software Versions: 00.51,00.60, 00.61, 00.62, 00.63, 00.64, 00.67, 00.69, Edwards Lifesciences LLC., Irvine, CA 92614

  MAP offset errors: If users are "slaving" mean arterial pressure (MAP) from the bedside monitor into the Vigilance II Monitor for the purpose of the continuous calculation of systemic vascular resistance (SVR), at times, on some bedside monitors, the Vigilance II monitor may display a MAP offset of as much as 25mmHg. Since the MAP is used in calculations of various patient parameters such as SVR,

• TerminatedLabeling mix-ups

  CM 50-001-01 Injectate Kit, accessory device to LiDCOunity v2 Monitor - Product Usage: intended to administer lithium dilution indicator (tube administrative set).

  The expiration date on labeling is incorrect.

• TerminatedSoftware design

  icumedical Cogent" Hemodynamic Monitoring System - Product Usage: intended for patients for whom the monitoring of continuous cardiac output and calculated hemodynamic parameters is indicated for diagnostic and prognostic evaluation by a clinician.

  Due to a potential software issue, the display may show the incorrect continuous cardiac output (CCO) values after PulseCO calibration.

• TerminatedSoftware Design Change

  The Cogent Hemodynamic Monitoring System. REF58400-000, GTIN 00840619099459; REF 58400-000R, GTIN 0087709094314; REF 58403, GTIN 00840619079505; REF 58401, GTIN 00840619079499 - Product Usage: intended for patients for whom the monitoring of continuous cardiac output and calculated hemodynamic parameters is indicated for diagnostic and prognostic evaluation by a clinician. The target population includes Critical Care Patients, Trauma Patients, and Cardiac Surgery Patients.

  Firm identified software issues which leads to the patient ID and patient information not being stored in the system.

• TerminatedSoftware design

  PulsioFlex Monitoring System, Part Number: 6882747, Model Number: PC400 3 R0. Usage: The PulsioFlex Monitoring System is indicated in patients where cardiovascular and circulatory volume status monitoring is necessary. If a patient s biometric data are entered, the PulsioFlex Monitor presents the derived parameters indexed. -With the PiCCO Module cardiac output is determined both continuously through pulse contour analysis and intermittently through thermodilution technique. Both are used for the determination of other derived parameters. -With the CeVOX oximetry module connected to a compatible oximetry probe, the PulsioFlex Monitoring System measures continuous venous oxygen saturation to assess oxygen delivery and consumption. The use of the PulsioFlex Monitoring System is indicated in patients where cardiovascular and organ monitoring is useful. This includes patients in surgical, medical, and other hospital units

  The monitor displays an error message . The error message states "internal error restart or service".